Subwoofers
Showing 25–39 of 39 results
-
12", Pioneer
Pioneer TS-W311D4 12″ Dual Voice Coil Subwoofer (1400W)
More bass. More power. Greater flexibility.
Get powerful, punchy bass in your car ? from the pedigree of world record-breaking subs.
The TS-W310D4 features a combined IMPP cone, which makes the body ultra-rigid yet lightweight, giving you low distortion and powerful bass at high sound press levels.
MPP Composite Seamless Cone
An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels. Pioneer?s New IMPP Composite Seamless Cones meet this need perfectly while delivering accurate yet powerful bass.
Dual-Layer Elastic Polymer Surround
Another world?s first from Pioneer. Dramatically improves durability and lightness for superior response, especially for louder volume.Large Surface Area
A speaker cone is essential for air to vibrate and carry sound to listeners? ears. Our Champion Series subwoofer cones have 14% more surface area than conventional subwoofer cones, for louder, better bass reproduction.Single/Dual Voice Coil Design
Pioneer offers single voice coil and dual voice coil designs. The Dual 4 ? subwoofer has the flexibility to be wired at 2 or 8 ?, to get the most from the amplifier. To simplify installation even further, all speaker terminals have been placed on one side of the subwoofer rather than on opposite sides.Air Vent
The movement of air within the subwoofer is smoothly channeled for optimal ventilation to ensure a quick response and clear reproduction of bass.Other Features
? Extra-tough suspension for high durability to withstand high input power.
? 4-Layer Copper voice coil with aluminium former for improved heat dissipation.
? Subwoofer design allows for flexible in-car installation in a box or in a free-air type application.Features
-
Maximum input power1.400?W
-
Nominal input power400?W
-
Impedance2? / 8?
-
Frequency response20 ? 250?Hz
-
Sensitivity (1W/1m)95?dB
-
Woofer size30,0?cm
-
Woofer materialIMPP Composite Seamless Cone
-
Voice Coil typeDual
-
Dual 4? voice coils: 2 or 8?
-
Pole Yoke TypeExtended and Vented pole yoke
-
TerminalsPush-type
-
Weight6.2 kg
-
SurroundDual Layer, Fiber Reinforced Elastic Polymer Surround
Thiele/Small Parameters
-
Qts0,77
-
Fs [Hz]37
-
Vas [ft3]1,21
-
Xmax [mm]10,8
-
Xmax [in]0,42
SKU: n/a -
-
15", Rockford Fosgate
Rockford Fosgate P1S2 15″ Subwoofer
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music ? and feel it too ? Punch components will give you impressive sound that’ll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S2-15 15″ subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar? fibers used in bulletproof vests so you get the best of both worlds ? warm bass that’s exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S2-15 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.?The sub’s 2-ohm impedance will draw maximum wattage from your mono sub amp.
To drive this single subwoofer, we recommend a mono amplifier rated between 200 and 375 watts RMS at 2 ohms
Product Highlights:
- 15″ 2-ohm subwoofer
- Kevlar? reinforced paper cone
- nitrile butadiene rubber (NBR) surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- Vertical Attach Surround Technique (VAST?) increases cone area
- power range: 50-250 watts RMS (500 watts peak power)
- frequency response: 18-250 Hz
- sensitivity: 87 dB
- top-mount depth: 6-5/16″
- sealed box volume: 1.3-3.5 cubic feet
- ported box volume: 2.66 cubic feet
SKU: n/a -
12", Rockford Fosgate
Rockford Fosgate P1S2-12 12? Punch P1 2-Ohm SVC Subwoofer
Rockford Fosgate P1 12? is the first in a family of famous ?Punch? subwoofers. The P1S2-12 features a 2-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring.
- Linear spider with embedded 16 AWG tinsel leads
- High-temp voice coil with spun-laced Nomex? re-inforcement collar
- Kevlar fiber reinforced paper cone
- StampCast basket with integrated spider venting
- Soft touch ABS trim ring with optional grille
- Custom 10-AWG nickel plated push terminals
- Extended pole piece and bumped vented backplate
- Protective PVC textured magnet cover
SKU: n/a -
15", Rockford Fosgate
Rockford Fosgate P1S4 15″ Subwoofer
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music ? and feel it too ? Punch components will give you impressive sound that’ll stand out in a crowd.
Engineers at Rockford Fosgate designed the P1S4-15 15″ subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar fibers used in bulletproof vests so you get the best of both worlds warm bass that’s exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.
The P1S2-15 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.?The sub’s 2-ohm impedance will draw maximum wattage from your mono sub amp.
To drive this single subwoofer, we recommend a mono amplifier rated between 200 and 375 watts RMS at 2 ohms
Product Highlights:
- 15″ 4-ohm subwoofer
- Kevlar? reinforced paper cone
- nitrile butadiene rubber (NBR) surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- Vertical Attach Surround Technique (VAST?) increases cone area
- power range: 50-250 watts RMS (500 watts peak power)
- frequency response: 18-250 Hz
- sensitivity: 87 dB
- top-mount depth: 6-5/16″
- sealed box volume: 1.3-3.5 cubic feet
- ported box volume: 2.66 cubic feet
SKU: n/a -
12", Rockford Fosgate
Rockford Fosgate P2D4-12″ Subwoofer
his P2 sub features an extended pole piece and bumped backplate that leaves more room for heavy excursion, so it’ll hit deeper lows without “bottoming out.” Special venting keeps the copper-clad aluminum voice coils cool through heavy use for consistent bass performance over time.
The dual 4-ohm voice coils allow you to wire the sub for 2-ohm impedance to work with a mono sub amp, or for 8-ohm impedance if you’re using multiple subs. The P2D4-12 sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system.
To drive this single subwoofer, we recommend a mono amplifier rated between 300 and 600 watts RMS at 2 ohms.
Product Highlights:
- 12″ subwoofer with dual 4-ohm voice coils
- Kevlar? reinforced paper cone
- Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- power range: 150-400 watts RMS (800 watts peak power)
- frequency response: 27-250 Hz
- sensitivity: 86 dB
- top-mount depth: 6-3/8″
- sealed box volume: 0.70-1.80 cubic feet
- ported box volume: 1.79 cubic feet
SKU: n/a -
10", Rockford Fosgate
Rockford Fosgate P3D4-10″ Subwoofer
Product Highlights:
- 10″ subwoofer with dual 4-ohm voice coils
- anodized aluminum cone with Santoprene surround
- hybrid StampCast basket provides strength while minimizing weight and resonance
- Vertical Attach Surround Technique (VAST?) increases cone area
- power range: 250-500 watts RMS (1000 watts peak power)
- frequency response: 28-250 Hz
- sensitivity: 82 dB
- top-mount depth: 6-3/16″
- sealed box volume: 0.5-0.75 cubic feet
- ported box volume: 1.4 cubic feet
SKU: n/a -
Loaded Enclosures, Rockford Fosgate
Rockford Fosgate P3S-1X12 Single P3 12″ Shallow Loaded Enclosure
The Rockford Fosgate P3S-1X12 is a single 12? Punch Shallow subwoofer rated at 400 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8? MDF and 10 AWG quick-release input terminals.
- Sealed truck box style enclosure
- Constructed with 5/8″ MDF
- 10 AWG input terminals
- 1-Ohm wired impedance
- Computer optimized design
- Covered with high density carpet
- Wired exclusively with Rockford Fosgate speaker cable
- Included trim ring ready to accept optional stamped mesh grille insert
Nominal Impedance (ea): 1-Ohm
Internally wired to create a 1-Ohm amplifier loadPower Handling: 400 Watts RMS
800 Watts MAXSystem Configuration: Sealed Enclosure Material: 5/8″ MDF (Medium Density Fiberboard) Speaker Connector: Up to 10 AWG compression terminals Shipping Weight: 27 Lbs. (12.24 kg) Dimensions
Box (H x W x D)
Wedge (H x W x D1 x D2):13.5 x 27.4 x D1 5.3 – D2 3.3 (in)
34.29 x 69.59 x D1 13.46 – D2 8.38 (cm)SKU: n/a -
Loaded Enclosures, Rockford Fosgate
Rockford Fosgate R2S-1X12 12? Prime R2S Shallow Loaded Enclosure
The R2S-1X12 is a single 12? shallow enclosure with 250 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8? MDF, covered in high density carpet, and features quick release compression terminals.
- Constructed with 5/8? MDF
- Covered with high density carpet
- High current binding posts
SKU: n/a
