DD Audio 712-D2 12″ Subwoofer
Out of stock
Budget-minded car audio lovers can now get affordable quality subs from a global leader. Our new DD AUDIO REDLINE is an import subwoofer line built with the same quality standards as our American-made lines, a favorite of audio enthusiasts. We’re hand-building these subs using the same DD Audio innovations, plus, parts tooled to our exact specifications to provide the performance we demand. The DD AUDIO REDLINE is only available from select dealers.
Technical Specs:
700 Series – 225 oz triple magnet,
3.0″ voice coil,
3 layer spider,
cast frame,
600-1200 RMS/3600 peak,
D2 – D4
$499 $540
Out of stock
Related products
-
Monoblock, DD Audio
DD Audio M4B 5000w RMS Mono-Block
Description
The M4b is the 3rd generation of our very popular M4 amp. the M4 amps have garnished a reputation worldwide for producing amazingly high, yet extremely stable, output levels form a relatively small chassis . Since the original M4 was introduced we vastly improved upon the power supply’s current capability and efficiency, and added an extra 1,000 watts of output capability. Just like the original M4 this 3rd generation is designed to be the best amp for hard street use on the market. The M4b is able to generate and maintain clean power levels in excess of 5000 watts from a real-world charging system.
This amp also features dual OAWG power and ground inputs since it take power to make power. The through bolted RCAs also add durability to this design.
For installation ease, and upgradeability the M4b features Strap and Link mode. When using one of these modes you’re able to use multiple M4b in an install and control the Strapped or Linked amplifiers level settings from the main amp and and remote.
The M4b also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center that’s able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
Specifications
Frequency Response: 15Hz-270Hz
Channels: 1
Cont Power at 1 Ohm: 3200W x 1ch @ 12V, 5,000W x 1ch @ 14.4V
Crossover Slope: 24dB/Oct
Damping Factor: 150< Dimensions (US): 22 x 9.12 x 2.5 in Dimensions (Metric): 55.88 x 23.16 x 6.35 cm Dynamic Power: 7000W Efficiency Thru Output: 84% @ 4ohm Input Sensitivity: 5V-0.15V S/N Ratio: 100dB Shipping Weight: 28 lbs / 12.7 kg Variable Bass Boost: 0-6dB @ 45Hz Variable High Pass Filter: 10Hz-50Hz Variable Low Pass Filter: 20Hz-200Hz Wire Gauge (Power and Ground): 2 x 0 AWG Wire Gauge (Speaker Output): 10 AWGSKU: n/a -
12", DD Audio
DD Audio DD-812-D1 12″ Subwoofer
The 800 Series is aimed directly at the over the top bass cruising market. These subs get low and loud for an entire evening long cruise. The motor was designed around a humungorific 4 inch, high temperature, USA made, flat wire, aluminum voice coil. ?This monster subs also possesses features such as backplate venting, basket venting and outer shorting ring/heat sinking to ensure the highest long-term heat dissipation possible.The suspension is a combination of two DD Audio innovations. It utilizes a higher density EROM surround coupled with an exclusive multi-layer composite spider system. This style of suspension gives precise coil movement and long term durability under heavy use.The new 800 Series is some serious equipment made for the system designer who is going all out in the pursuit of the ultimate bass experience.800 Series Features:- Double Stitched EROM Surrounds
- High-temp 4.0?, aluminum former voice coil
- Laminated Spiders
- Non-pressed paper cones
- Cooling vent equipped cast aluminum baskets
- Back plate coil gap venting
- Extended pole piece
SPECS
MODEL 812 Driver Size – in 12 Power Band – Watts 1000 – 2000 Burst Power – Watts 6000 VCD – in 4 Impedance D1 / D2 Sd – in 10 Fs – Hz 37.68 Qms 5.218 Qes 0.493 Qts 0.451 Vas – cu ft 0.736 Xmech – mm 80 Xmax – mm 18 Cutout Diameter – in 11.25 Mounting Depth – in 7.625 Motor Diameter – in 9.5 Driver Displacement – cu ft 0.23 Shipping Weight – lbs 55.8 Sealed Enclosure – cu ft N/A Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a -
Component, DD Audio
DD Audio CC6.5 A 6.5″ High Quality Component Set
Audibly Refined| 6.5″ High Quality Component Set
The C Class 2-Way Component System is the perfect balance of high-fidelity refinement and value.
Mid-Woofer
The 6.5-in mid-woofer features a coated paper cone that provides warm tonal characteristics with added environmental element resistance for the mobile environment. The surround is made of a lightweight rubber compound that adds durability without sacrificing any sound. For the frame, we used a sexy low resonance cast aluminum frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils feature a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 17 Oz ferrite magnet motor.Tweeter
The 25-mm silk dome tweeter features a vented back for a wider/smoother frequency response.Crossover
The Crossover networks are built with premium components, including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Three selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 25mm
Power Band – Watts
60-180
Impedance
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.73 / Tweeter 1.65
Mounting Depth – in
Woofer 2.67 / Tweeter 0.47
Shipping Weight – lbs
10Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a
