DD Audio DC5x7 D CLASS 5X7 COMPONENT SET
Out of stock
The D Class 5×7 Component set consists of high tech, high fidelity drivers designed for the listener wanting to go well beyond the standard factory upgrade.
Woofer:
Our focus on sound quality starts with precision motor assemblies. The machined magnet gaps driven with high energy strontium magnets provide strong output from a compact design. We incorporated distortion reducing copper shorting rings for flux modulation and inductance control. The aluminum mid woofer cones achieve wide bandwidth and efficient energy transfer to the air. The compressed rubber surrounds are durable and have been optimized for light weight to increase sensitivity.
Tweeter:
The tweeter side of the D Class component sets is our T2a 25mm ultra-light diaphragm tweeter. This new diaphragm is less than 0.003 of an inch thick; that’s almost nothing of a mm. This proprietary fabric is so thin it’s virtually see through, well, actually it is see through. The ultra-light dome is coupled to a low-distortion, neo motor with flush/surface mounting hardware and metal grill options.
Crossover:
The 2-way crossover features low distortion coils and metalized polypropylene caps that pass the source without degradation. The D Class components are purposefully built, enthusiast quality sets — everything yo u need for great sound and nothing you don’t.
SPECS
Driver Size – in Woofer 6×9 / Tweeter 25mm
Power Band – Watts 50-150
Impedance S4
Frequency Response – Hz 40-25k
dBSPL 90
Cutout Diameter – in 4.96 x 7.16
Mounting Depth – in 2.29
Shipping Weight – lbs 10
Note: Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
$369 $420
Out of stock
Related products
-
5" x 7", Pioneer
Pioneer TS-A6886R 6″x8″ 4-Way Car Speakers
Pioneer’s pumped-up TS-A Series TS-A6886R 6″x8″ 4-way speakers give you a powerful speaker solution with a friendly price tag so that you don’t go over budget building a whole system. Pair these puppies with a new car stereo for a refreshing sonic upgrade, or go all the way and power them with an outboard amp. Either way, these Pioneers will handle up to 60 watts RMS, so you’ll have a high ceiling for cranking your jams.
Listen with authority
These speakers deliver a satisfying punch, thanks to a woofer cone made of reinforced mica for rigidity and responsiveness. Pioneer adds an extra midrange driver so you get the most out of chunky guitar riffs, powerful drums, and distinct bass lines that otherwise would remain hidden when listening on sub-par speakers. Two dome tweeters add in all the high-frequency details that make music exciting.Product Highlights:
6″x8″ 4-way car speakers (pair)
multilayer mica-matrix woofer with elastic polymer surround
1-5/8″ paper cone midrange
3/8″ PET (Polyethylene Terephthalate) dome tweeter and supertweeter
power range: 5-60 watts RMS (350 watts peak power)
frequency response: 28-39,000 Hz
sensitivity: 91 dB
top-mount depth: 2-3/8″SKU: n/a -
Monoblock, DD Audio
DD Audio M4B 5000w RMS Mono-Block
Description
The M4b is the 3rd generation of our very popular M4 amp. the M4 amps have garnished a reputation worldwide for producing amazingly high, yet extremely stable, output levels form a relatively small chassis . Since the original M4 was introduced we vastly improved upon the power supply’s current capability and efficiency, and added an extra 1,000 watts of output capability. Just like the original M4 this 3rd generation is designed to be the best amp for hard street use on the market. The M4b is able to generate and maintain clean power levels in excess of 5000 watts from a real-world charging system.
This amp also features dual OAWG power and ground inputs since it take power to make power. The through bolted RCAs also add durability to this design.
For installation ease, and upgradeability the M4b features Strap and Link mode. When using one of these modes you’re able to use multiple M4b in an install and control the Strapped or Linked amplifiers level settings from the main amp and and remote.
The M4b also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center that’s able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
Specifications
Frequency Response: 15Hz-270Hz
Channels: 1
Cont Power at 1 Ohm: 3200W x 1ch @ 12V, 5,000W x 1ch @ 14.4V
Crossover Slope: 24dB/Oct
Damping Factor: 150< Dimensions (US): 22 x 9.12 x 2.5 in Dimensions (Metric): 55.88 x 23.16 x 6.35 cm Dynamic Power: 7000W Efficiency Thru Output: 84% @ 4ohm Input Sensitivity: 5V-0.15V S/N Ratio: 100dB Shipping Weight: 28 lbs / 12.7 kg Variable Bass Boost: 0-6dB @ 45Hz Variable High Pass Filter: 10Hz-50Hz Variable Low Pass Filter: 20Hz-200Hz Wire Gauge (Power and Ground): 2 x 0 AWG Wire Gauge (Speaker Output): 10 AWGSKU: n/a -
Component, DD Audio
DD Audio CC6.5 A 6.5″ High Quality Component Set
Audibly Refined| 6.5″ High Quality Component Set
The C Class 2-Way Component System is the perfect balance of high-fidelity refinement and value.
Mid-Woofer
The 6.5-in mid-woofer features a coated paper cone that provides warm tonal characteristics with added environmental element resistance for the mobile environment. The surround is made of a lightweight rubber compound that adds durability without sacrificing any sound. For the frame, we used a sexy low resonance cast aluminum frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils feature a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 17 Oz ferrite magnet motor.Tweeter
The 25-mm silk dome tweeter features a vented back for a wider/smoother frequency response.Crossover
The Crossover networks are built with premium components, including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Three selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 25mm
Power Band – Watts
60-180
Impedance
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.73 / Tweeter 1.65
Mounting Depth – in
Woofer 2.67 / Tweeter 0.47
Shipping Weight – lbs
10Any DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a -
