Shop
Showing 73–96 of 354 results
-
12", DD Audio
DD Audio DD-812-D1 12″ Subwoofer
The 800 Series is aimed directly at the over the top bass cruising market. These subs get low and loud for an entire evening long cruise. The motor was designed around a humungorific 4 inch, high temperature, USA made, flat wire, aluminum voice coil. ?This monster subs also possesses features such as backplate venting, basket venting and outer shorting ring/heat sinking to ensure the highest long-term heat dissipation possible.The suspension is a combination of two DD Audio innovations. It utilizes a higher density EROM surround coupled with an exclusive multi-layer composite spider system. This style of suspension gives precise coil movement and long term durability under heavy use.The new 800 Series is some serious equipment made for the system designer who is going all out in the pursuit of the ultimate bass experience.800 Series Features:- Double Stitched EROM Surrounds
- High-temp 4.0?, aluminum former voice coil
- Laminated Spiders
- Non-pressed paper cones
- Cooling vent equipped cast aluminum baskets
- Back plate coil gap venting
- Extended pole piece
SPECS
MODEL 812 Driver Size – in 12 Power Band – Watts 1000 – 2000 Burst Power – Watts 6000 VCD – in 4 Impedance D1 / D2 Sd – in 10 Fs – Hz 37.68 Qms 5.218 Qes 0.493 Qts 0.451 Vas – cu ft 0.736 Xmech – mm 80 Xmax – mm 18 Cutout Diameter – in 11.25 Mounting Depth – in 7.625 Motor Diameter – in 9.5 Driver Displacement – cu ft 0.23 Shipping Weight – lbs 55.8 Sealed Enclosure – cu ft N/A Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a -
12", DD Audio
DD Audio DD512-D2 12″ Subwoofer
The 500 series is one of the best performing subs you can find in its power class. With a highly efficient design, the 500 series can easily be driven to high output levels on as little as 150-400 Watts. The 500s are very versatile subs with their?laminated double layer poly cotton spider allows them to work well in sealed enclosures, and its double stack magnet provides the extra energy needed for vented enclosures applications.
500 Series Features:
- Double Stitched EROM Surrounds
- High-temp 2.0?, aluminum former voice coil
- 150w-400w RMS, 1200w Peak
- Laminated Spiders
- Non-pressed paper cones
- Cooling vent equipped baskets
- Back plate coil gap venting
- Extended pole piece
SPECS
MODEL 512C Driver Size – in 12 Power Band – Watts 150 – 400 Burst Power – Watts 1200 VCD – in 2 Impedance D2 / D4 Sd – in 10 Fs – Hz 36.34 Qms 6.582 Qes 0.840 Qts 0.745 Vas – cu ft 1.194 Xmech – mm 64 Xmax – mm 11 Cutout Diameter – in 11.125 Mounting Depth – in 5.688 Motor Diameter – in 6 Driver Displacement – cu ft 0.09 Shipping Weight – lbs 15 Sealed Enclosure – cu ft 0.5 – 1.0 Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a -
12", DD Audio
DD Audio DD612-D2 12″ Subwoofer
The 600 Series is a great entry point for a higher performance system design that keeps the vehicle as close to stock as possible. The 600 Series will perform like a boss on as little as 300-600 Watts rms, meaning even multiple woofer systems can be driven with one moderate powered amplifier. This keeps electrical upgrades minimal with less added strain on the vehicle. It has a high energy, double stack motor paired with a laminated triple layer poly cotton spider suspension. The 600 Series works best with vented and multi-order?enclosures.
600 Series Features:
-
The 600 series woofers features:
- Double Stitched EROM Surrounds
- High-temp 2.5?, aluminum former voice coil
- 300W-600W RMS
- 1800W Peak
- Triple Layer Laminated Spiders
- Non-pressed paper cones
- Stamped steel basket with cooling vents (note : the 8″ has a cast aluminum basket)
- 10-AWG Push Terminals
- Back plate coil gap venting
- 3-Way cooling
- Extended pole piece
- 110oz double stack magnet
SPECS
MODEL 612 Driver Size – in 12 Power Band – Watts 300 – 600 Burst Power – Watts 1800 VCD – in 2.5 Impedance D2 / D4 Sd – in 10 Fs – Hz 37.68 Qms 6.305 Qes 0.692 Qts 0.624 Vas – cu ft 0.914 Xmech – mm 64 Xmax – mm 13 Cutout Diameter – in 11.125 Mounting Depth – in 5.938 Motor Diameter – in 6.375 Driver Displacement – cu ft 0.09 Shipping Weight – lbs 18 Sealed Enclosure – cu ft N/A Ported Enclosure – cu ft 1.75 – 2.75 SKU: n/a -
-
Component, DD Audio
DD Audio EC6.5 6.5″ Component Set
The E Class 2-Way Component System is perfect for the listener who wants to instantly take their system from factory to fantabulous. This set offers high-end features and an outstanding sound that rivals much more expensive component sets.
Woofer:
The 6.5-inch Woofer features an injection molded poly cone, rubber surround , and rigid steel frame. For reduced inductance, extended high-frequency roll off , and increased efficiency the voice coils features a double slit former and the motor utilizes a copper pole cap . The soft parts are driven with a high flux 11 Oz ferrite magnet motor.Tweeter:
The 20-mm silk dome tweeter comes with flush-mount and surface-mount solutions.Crossover:
The crossover networks are built with premium components including Mylar capacitors, segmented air-core inductors and poly fuses for tweeter protection. Two selectable tweeter levels are provided for fine high-frequency tuning.Driver Size – in
Woofer 6.5 / Tweeter 20mm
Power Band – Watts
25-100
Coil Configuration
S4
Frequency Response – Hz
50-20k
Cutout Diameter – in
Woofer 5.60 / Tweeter 1.59
Mounting Depth – in
Woofer 2.45 / Tweeter 0.53
Shipping Weight – lbs
10LbsAny DD Audio Product bearing the Marine Grade logo incorporates water resistant features enabling it to be used in applications where moderate exposure to moisture will not result in damage to the product.
Marine Grade products are not waterproof, and submersion or excessive moisture exposure may result in product failure. DD Audio Marine Grade products are not certified for saltwater environments.
Copper Capped Pole Piece
As current flows through the voice coil, it generates its own magnetic field which interacts, or modulates the motors permanent magnet field. A shorting ring cancels these magnetic field changes and lowers inductance, extending the frequency range and reducing harmonic distortion.Aluminum – Double Slit Voice Coil Former
The aluminum former material acts as a heat sink, lowering the voice coil temperature. The double slits in the former break up and reduce magnetic eddy currents generated by the moving coil. The coil design works in conjunction with the copper capped pole piece to further reduce heat, inductance, and harmonic distortions.SKU: n/a -
DD Audio, Monoblock
DD Audio M1D Monoblock Amplifier 1700w x 1 @ 1 Ohm
The M1 is one of our most popular amps of all time, and it is now entering its 5th generation. The M1d is the perfect amp for a myriad of applications, delivering over 1200 Watts of true RMS power at 12 Volts, 1700 Watts continuous at 14.4 Volts, and over 2500 Watts dynamic power. The compact layout uses our LV type twin power supply, which keeps the chassis small and the power big while allowing for a plethora of mounting options. 0 Gauge power connections and through bolted RCAs provided high-end features at an affordable price.
For installation ease, and upgradeability the M1d features Strap and Link mode. When using one of these modes you’re able to use multiple M1d in an install and control the Strapped or Linked amplifiers level settings from the main. You’ll also be able to use a single remote gain to control all strapped and linked amps.
The M1d also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center that’s able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
SPECS
Test Voltage 12 / 14.4
Channels 1
Cont Wattage @ 4ohm N/A
Cont Wattage @ 2ohm N/A
Cont Wattage @ 1ohm 1,200×1@12V / 1,700×1@14.4V
Dynamic Wattage 2,500×1
Max Current Draw – Amperage 170
S/N Ratio >100dB
THD <0.2% Input Voltage Sensitivity 8 - 0.2 Pass-Through Output Yes Remote Subwoofer Control Yes Power Wire Guage In 1 x 0 Speaker Wire Gauge Out 10 Dimensions: in 13.77 x 3.88 x 2.14 Dimensions: mm 350 x 175 x 54.5 Shipping Weight - lbs 11SKU: n/a -
DD Audio, Monoblock
DD Audio M4B 5000w RMS Mono-Block
Description
The M4b is the 3rd generation of our very popular M4 amp. the M4 amps have garnished a reputation worldwide for producing amazingly high, yet extremely stable, output levels form a relatively small chassis . Since the original M4 was introduced we vastly improved upon the power supply’s current capability and efficiency, and added an extra 1,000 watts of output capability. Just like the original M4 this 3rd generation is designed to be the best amp for hard street use on the market. The M4b is able to generate and maintain clean power levels in excess of 5000 watts from a real-world charging system.
This amp also features dual OAWG power and ground inputs since it take power to make power. The through bolted RCAs also add durability to this design.
For installation ease, and upgradeability the M4b features Strap and Link mode. When using one of these modes you’re able to use multiple M4b in an install and control the Strapped or Linked amplifiers level settings from the main amp and and remote.
The M4b also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center that’s able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
Specifications
Frequency Response: 15Hz-270Hz
Channels: 1
Cont Power at 1 Ohm: 3200W x 1ch @ 12V, 5,000W x 1ch @ 14.4V
Crossover Slope: 24dB/Oct
Damping Factor: 150< Dimensions (US): 22 x 9.12 x 2.5 in Dimensions (Metric): 55.88 x 23.16 x 6.35 cm Dynamic Power: 7000W Efficiency Thru Output: 84% @ 4ohm Input Sensitivity: 5V-0.15V S/N Ratio: 100dB Shipping Weight: 28 lbs / 12.7 kg Variable Bass Boost: 0-6dB @ 45Hz Variable High Pass Filter: 10Hz-50Hz Variable Low Pass Filter: 20Hz-200Hz Wire Gauge (Power and Ground): 2 x 0 AWG Wire Gauge (Speaker Output): 10 AWGSKU: n/a -
4", Focal
Focal 100 AC 4″ 2-WAY COAXIAL KIT
The Access 100 AC car audio kit produces very good results in your car’s original speaker fitting locations. This means you benefit from Focal sound in a most impressive value-for-money package.
Product Specifications:
Diameter: 4? (100mm)
Mounting depth: 21/16? (52mm)
Voice-coil diameter: 1? (25mm)
Voice-coil height: 07/16? (11mm)
Magnet: 23/4? (70mm)
DFS Cone
Aluminium inverted dome tweeter
Integrated crossover 6dB/oct (4.7kHz)
Max. power: 80W
Nom. power: 40W
Sensitivity (2.83V/1m): 89dB/oct
Frequency response: 90Hz-20kHz
Supplied with grillSKU: n/a -
5", Focal
Focal 130 AC 5″ 2-WAY COAXIAL KIT
The coaxial Access 130 CA kit offers real dynamism for your sounds. With their 130 mm diameter, these speakers develop a rated power of 50 W and can be fitted into your car both front and back.
Product Specifications:
Diameter: 5? (130mm)
Mounting depth: 21/8? (54.5mm)
Voice-coil diameter: 1? (25mm)
Voice-coil height: 07/16? (11mm)
Magnet: 31/3? (85mm)
DFS Cone
Aluminium inverted dome tweeter
Integrated crossover 6dB/oct (4.7kHz)
Max. power: 100W
Nom. power: 50W
Sensitivity (2.83V/1m): 91dB/oct
Frequency response: 65Hz-20kHz
Supplied with grillSKU: n/a -
5", Focal
Focal 130AS 5″ 2-WAY COMPONENT KIT
The 130 mm Access 130 AS 2-way component speaker kit is very versatile. It fits perfectly into your vehicle interior and offers three different mounting options for the tweeter. You can very easily use the tweeter’s 3-position level control, thanks to its separate, easy-to-fit filter.
Product Specifications:
Diameter: 5? (130mm)
Mounting depth: 23/8? (55mm)
Voice-coil diameter: 1? (25mm)
Voice-coil height: 07/16? (11mm)
Magnet: 31/3? (85mm)
Supplied with grille
Aluminium inverted dome tweeter
Separated crossover: 12/12dB/oct (5kHz),
DFS Cone
Max. power: 100W
Nom. power: 50W
Sensitivity (2.83V/1m): 91dB/oct
Frequency response: 65Hz-20kHz
Accessories: tweeter support, screwSKU: n/a -
6", Focal
Focal 165 AC 6.5″ 2-WAY COAXIAL KIT
The Access 165 AC coaxial kit puts Focal sound in your car with no fuss. Measuring 165 mm (6?”) in diameter and with 60 W rated power, this kit is easily fitted for an effective, responsive audio system.
Product Specifications:
Diameter: 61/2? (165mm)
Mounting depth: 21/2? (63.5mm)
Voice-coil diameter: 1? (25mm)
Voice-coil height: 07/16? (11mm)
Magnet: 31/3? (85mm)
DFS Cone
Aluminium inverted dome tweeter
Integrated crossover 6dB/oct (4.7KHz)
Max. power: 120W
Nom. power: 60W
Sensitivity (2.83V/1m): 92dB/oct
Frequency response: 60Hz-20kHz
Supplied with grillSKU: n/a -
Component, Focal
Focal 165 AS 6.5″ 2-WAY COMPONENT KIT
The Access 165 AS car audio 2-way component kit is of sufficiently high sensitivity to be directly connected to a car stereo. It has 3-position tweeter adjustment for optimal listening comfort. Accessories shipped with the tweeter enable multiple fitting options and finding the best sound stage.
Product Specifications:
Diameter: 61/2? (165mm)
Mounting depth: 25/8? (66mm)
Voice-coil diameter: 1? (25mm)
Voice-coil height: 07/16? (11mm)
Magnet: 31/3? (85mm)
Supplied with grille
Aluminium inverted dome tweeter
Separated crossover: 12/12dB/oct (4.8kHz),
DFS Cone
Max. power: 120W
Nom. power: 60W
Sensitivity (2.83V/1m): 92dB/oct
Frequency response: 60Hz-20kHz
Accessories: tweeter support, screwSKU: n/a -
5" x 7", Focal
Focal 570 AC 5X7″ 2-WAY COAXIAL KIT
The Access 570 AC kit is specially designed to replace Ford?, Jaguar? and Mazda? oem audio installations. Its 5×7″ dimensions, specially designed for these vehicles, mean that installation is simplified. And its integral filter simplifies speaker connections: all that is needed is a simple connection to your car stereo.
Specifications:
Diameter: 5 x 7 (130 x 180mm)
Mounting depth: 59 .5mm
Voice-coil diameter: 1? (25mm)
Voice-coil height: 07/16? (11mm)
Magnet: 39/16? (85mm)
Aluminium inverted dome tweeter
DFS Cone
Integrated crossover: 6dB/oct (5kHz)
Max. power: 120W
Nom. power: 60W
Sensitivity (2.83V/1m): 89dB/oct
Frequency response: 65Hz-20kHzSKU: n/a -
6" x 9", Focal
Focal 690 AC 6X9″ 2-WAY COAXIAL KIT
The Access 690 coaxial kit has been designed to reproduce deep bass throughout your vehicle. It will be equally at home in your car’s doors or parcel shelf *. As with the other products in this range, its built-in filter means you can quickly connect your kit to a car stereo or power amplifier from our Performance range.
* depending on oem fittings
Specifications:
Diameter: 6×9? (164x235mm)
Mounting depth: 82mm
Voice-coil diameter: 13/16? (30mm)
Voice-coil height: 07/16? (11mm)
Magnet: 39/16? (90mm)
Aluminium inverted dome tweeter
DFS Cone
Integrated crossover: 6dB/oct (5kHz)
Max. power: 150W
Nom. power: 75W
Sensitivity (2.83V/1m): 91dB/oct
Frequency response: 50Hz-20kHzSKU: n/a -
4", Focal
Focal Auditor R-100C 2 Way Coaxial Speakers
This 2-way coaxial kit composed of 2 woofers of 4?? diameter will easily integrate into your car offering you a neutral, natural and dynamic sound. Its little size and discretion will not alter at all its power.
Specifications:
Diameter: 4? (100mm)
Mounting depth: 48.2
Cone: Polyprop
Voice-coil diameter: 1? (25mm)
Max. power: 60W
Nom. power: 30W
Sensitivity (2.83V/1m): 88dB
Frequency response: 80Hz-28kHz
Mylar Tweeter
Supplied with grillSKU: n/a
