Pioneer GM-D8601Mono 1600W Class-D Car Amp, with Bass Boost Remote
Out of stock
Features
-
Maximum Output Power1 x 600 W (4 ohm)
1 x 1000 W (2 ohm)
1 x 1600 W (1 ohm) -
CEA 2006 Power (THD N = 1%)1 x 300 W (20 Hz ? 240 Hz / 4?)
1 x 500 W (100 Hz / 2?)
1 x 800 W (100 Hz / 2?)
75 dBA (ref: 1 W into 4?) -
Continuous power output (RMS)1 x 300 W RMS (4?)
1 x 500 W RMS (2?)
1 x 800 W RMS (1?) -
Frequency response10 ? 240?Hz
-
Distortion10 W, 100 Hz ref. < 0.5?%
-
S/N ratio> 100?dB
-
Bass BoostRemote Control
Frequency 50Hz, Level 0-18dB -
LPF40 ? 240 Hz (-12 dB/oct)
-
RCA terminals
-
Speaker TerminalsBlock-type
-
Speaker line input sensorTurn-on sensor
-
Input level controlRCA (0.2V ? 6.5V)
SP (0.8V ? 16V) -
Max. current consumption (A/4?)24 A
-
Chassis size (W x H x D)265 x 60 x 200 ?mm
-
Unit weight2.7 ?kg
$349
Out of stock
Related products
-
Monoblock, Rockford Fosgate
Rockford Fosgate R1200-1D 1,200 Watt Class-D Mono Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.
- 12dB/octave Butterworth crossover
- Infrasonic filter
- Remote PLC (Punch Level Control)
- RCA pass-thru outputs
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- Top mounted controls
- 4 Gauge power/ground connectors
- MOSFET power supply
- Short circuit protection
Number of Channels: 4 Rated Power
(RMS Continuous Power):400 Watts x 1 @ 4-Ohm
800 Watts x 1 @ 2-Ohm
1200 Watts x 1 @ 1-OhmTotal Power
(Sum of Rated Power):1200 Watts RMS Dynamic Power
(PVC/PowerCube?):499 Watts x 1 @ 4-Ohms 0? Res
898 Watts x 1 @ 2-Ohms 0? Res
1,400 Watts x 1 @ 1-Ohm 0? ResBridgeable: No Frequency Response: 20Hz to 250Hz /-1dB Efficiency (average): 85% @ 4-Ohm
85% @ 2-Ohm
80% @ 1-OhmTotal Harmonic Distortion(THD Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%Crossover Controls: Low-Pass: Variable 50Hz – 500Hz @ 12dB/Octave
Infrasonic:Tone Controls: 0dB to 18dB @ 45Hz Input Sensitivity: 150 mV to 4 V Signal Input: Low Level: 1 RCA Pair Signal Output: Low Level: 1 RCA Pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Block Speaker Wire Gauge: 12 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Variable 0dB to 12dB @ 45Hz Visual Indicators: Power
ProtectCircuit Topology Class: Class-D Operating Voltage: 9 – 16 VDC Recommended Fuse
(not included):150 A Max. Current Draw (13.8V Sinewave): 110 A Average Current Draw (13.8V Music): 55 A Suggested Alternator: 100 A Shipping Weight: 7.825 Lbs. (7.82 Kg.) Dimensions (H x W x D): 1.97″ x 6.77″ x 11.06″
(5cm x 17.20cm x 28.10cm)SKU: n/a -
Monoblock, DD Audio
DD Audio M1D Monoblock Amplifier 1700w x 1 @ 1 Ohm
The M1 is one of our most popular amps of all time, and it is now entering its 5th generation. The M1d is the perfect amp for a myriad of applications, delivering over 1200 Watts of true RMS power at 12 Volts, 1700 Watts continuous at 14.4 Volts, and over 2500 Watts dynamic power. The compact layout uses our LV type twin power supply, which keeps the chassis small and the power big while allowing for a plethora of mounting options. 0 Gauge power connections and through bolted RCAs provided high-end features at an affordable price.
For installation ease, and upgradeability the M1d features Strap and Link mode. When using one of these modes you’re able to use multiple M1d in an install and control the Strapped or Linked amplifiers level settings from the main. You’ll also be able to use a single remote gain to control all strapped and linked amps.
The M1d also comes with the VM-RMT remote control. The VM-RMT is a mini amplifier diagnostic center that’s able to mount within arms reach for real-time performance monitoring and adjustments. From this remote you have fine gain control, amplifier input voltage monitoring, and output clipping monitoring.
SPECS
Test Voltage 12 / 14.4
Channels 1
Cont Wattage @ 4ohm N/A
Cont Wattage @ 2ohm N/A
Cont Wattage @ 1ohm 1,200×1@12V / 1,700×1@14.4V
Dynamic Wattage 2,500×1
Max Current Draw – Amperage 170
S/N Ratio >100dB
THD <0.2% Input Voltage Sensitivity 8 - 0.2 Pass-Through Output Yes Remote Subwoofer Control Yes Power Wire Guage In 1 x 0 Speaker Wire Gauge Out 10 Dimensions: in 13.77 x 3.88 x 2.14 Dimensions: mm 350 x 175 x 54.5 Shipping Weight - lbs 11SKU: n/a -
Single DIN, Pioneer
PIONEER SPH-C10BT Flagship Smartphone Multimedia Tuner with Pioneer Smart Sync connectivity.
Single DIN, PioneerPIONEER SPH-C10BT Flagship Smartphone Multimedia Tuner with Pioneer Smart Sync connectivity.
The SPH-C10BT is Pioneer’s flagship smartphone* receiver and is designed to let you use features of your smartphone* in a safe, direct and convenient way that you have never seen before.
Just place your smartphone* in the integrated cradle, and it will transform into an extension of your head unit. Using direct access keys, you can use your favorite apps without touching your smartphone*, helping to ensure a smooth and safe ride wherever you go. Add to this, when connected with the new Pioneer Smart Sync app, various colour and sound adjustments offer a superior customised in car experience.
Safe Access To Your Smartphone – Utilising the Pioneer Smart Sync app, you can connect to a wide variety of commonly used applications, including various music and mapping apps such as Spotify®# and Google Maps™#. It lets you easily access all the compatible apps you use on a daily basis without distracting you from the road.
Safety Features – Pioneer Smart Sync assists your safety by making every operation more intuitive. Voice recognition and optional parking sensors support safer driving. The SPH-C10BT can be connected to Pioneer’s ND-PS1 optional parking sensor kit.
Audio Features – Expect only the best audio environment when you’re driving in your car, you’ll get it with SPH-C10BT & Pioneer Smart Sync. Packed with advanced technologies that Pioneer has developed over the years, we can now offer you a greater variety of sound effects and audio adjustments, to upgrade the sound experience in your car.
Simply connect your smartphone* via wireless or wired connection, and pair with the free Pioneer Smart Sync app to enjoy a smarter, connected driving experience.
Many operations and features require the user to download the Pioneer Smart Sync app from the relevant app store.
*Smartphone not included
#Personal subscription and mobile data required.
Please comply with all applicable laws/regulations regarding mobile phone use in vehicles.
PIONEER SMART SYNC APP
Supporting the Pioneer Smart Sync App enables you to fully utilise the power of your smartphone, it expands, it evolves, and furthers every moment you spend in your car. Including the ability to playback music from your favourite streaming source, allow music playback from up to 5 devices, make calls, listen to messages, navigate to a destination, use voice recognition and tune your audio system.
COMPATIBLE FOR IPHONE
The SPH-C10BT is ready to roll with direct connectivity to your iPhone for various music playback and mapping services via a wireless Bluetooth or wired connection (recommended using an authentic Apple USB to lightning cable).
*We recommend confirming your iPhone compatibility with our Support team or your local authorised retailer, prior to making a purchase. Certain functions/features require users to download and use the Pioneer Smart Sync app.
COMPATIBLE FOR SELECT ANDROID
The SPH-C10BT is ready to roll with direct connectivity to selected Android devices. Supporting various music playback and mapping services via a wireless Bluetooth or wired connection (recommended using a genuine android cable).
*We recommend confirming your Android smartphone compatibility with our Support team or your local authorised retailer, prior to making a purchase. Certain functions/features require users to download and use the Pioneer Smart Sync app.
SKU: n/a -
Double DIN, Pioneer
Pioneer FH-S705BT Car Stereo with Dual Bluetooth, Spotify, Smartphone connectivity & Siri Eyes Free.
Double DIN, PioneerPioneer FH-S705BT Car Stereo with Dual Bluetooth, Spotify, Smartphone connectivity & Siri Eyes Free.
With smartphone pairing now a necessity in the car, Pioneer has beefed-up Bluetooth technology on the FH-S705BT, allowing you to connect two phones at the same time for hands-free calling or music streaming.
Ideal for those who travel with both a work + personal phone in the car, Pioneer’s Dual Bluetooth includes an auto connection function, so both phones automatically pair with the FH-S705BT. Once connected, iPhone users can go that step further and use their voice to control their phone, courtesy of built-in Siri Eyes Free technology.
In addition to Dual Bluetooth connectivity, the FH-S705BT comes with AM/FM radio, CD player, a dedicated audio source for Spotify music, plus USB/Aux-In. There’s also 3 x RCA Pre-Outs that allows you to connect extra audio products.
DUAL BLUETOOTH
Connect two Bluetooth phones simultaneously to the FH-S705BT. Now calls can be picked up by either of the paired phones, eliminating the need to pair and un-pair devices. Bluetooth Audio Streaming (A2DP, AVRCP 1.6) makes it possible to display information embedded in songs. Simple Paring (SSP,PIN code not needed).
WORKS WITH SPOTIFY
With Spotify being a dedicated audio source on the FH-S705BT, you now have the ability to control content from the Spotify app on an iPhone (via USB or Bluetooth) or an Android device (via Bluetooth). You can play, pause and skip tracks, browse playlists, albums and radio stations on the go using the Pioneer controls. If you are a Spotify premium user (requires a monthly paid subscription), you can enjoy ad-free, high quality music even when there is no internet connection.
SIRI® EYES FREE
To minimise distractions even more while driving iPhone users can use voice commands to ask Siri questions to access many iPhone functions such as music selection; making phone calls; and listening to text message, calendar information, and reminders. Users with an iPhone® 4s or newer can take advantage of Siri® Eyes Free functionality with a touch of a button. When activated, Siri voice prompts play through the vehicle’s speakers and the user’s commands and questions are received and transmitted to the receiver using the external microphone.
USB DIRECT CONTROL FOR IPHONE
The FH-S705BT is ready to roll with direct connectivity to your iPhone for music playback via an authentic Apple USB to lightning cable. Powerful tools such as Link Search and Alphabet Search help you find content faster. The system’s wired USB connection provides direct digital signal transfer from the device for clean, clear sound, while keeping your iPhone charged.
*We recommend confirming your iPhone compatibility with our Support team or your local authorised retailer, prior to making a purchase.
ANDROID MUSIC SUPPORT
Android devices running operating system 4.0 or later can be connected so music stored on their phone can be played on the FH-S705BT, without the need for an app. The process is made possible using Media Transfer Protocol (MTP). MTP allows the receiver to recognize the Android smartphone as a music storage device. Users can now access music via USB stored on an Android device and operate basic operations like FF, REW, Play, Pause, Random Play, and Repeat. Metadata information such as track, artist, and album name can be displayed.
*We recommend confirming your iPhone or iPod compatibility with our Support team or your local authorised retailer, prior to making a purchase.
SKU: n/a -
6", Pioneer
Pioneer TS-D1602R 6-1/2″ 2-Way Car speakers
Car audio enthusiasts know that replacing your factory speakers is the first step towards better sound. Pioneer TS-D1602R 2-way speakers sport innovative technologies and materials that’ll put your car’s sound miles ahead of where it was.
The journey begins with the innovative 6-1/2″ woofer ? a high-tech composite material made from basalt and Aramid creates a rigid, lightweight cone. This design supplies solid midbass punch with exceptional midrange definition, while its rubber surround ensures smooth cone excursion. A heavy stamped metal basket supports the woofer cone, dampening vibrations and resonances that can unduly color your music’s natural sound.
The oversized soft-dome tweeter radiates impressive highs, aided by a special wave guide that improves off-axis performance ? meaning you’ll get better stereo imaging in more locations throughout your car. A sealed rear chamber allows the tweeter to reach lower into the midrange to improve the definition of vocals and instruments. The tweeter’s compact and powerful neodymium magnet provides excellent performance even when the power levels are cranked.
Product Highlights:
2-way car speakers for 6-1/2″ and 6-3/4″ locations (pair)
Aramid/basalt fiber composite woofer with rubber surround
1-1/8″ soft dome tweeter
built-in 2-way crossover
frequency response: 35-32,000 Hz
recommended power range: 2-60 watts RMS
peak power handling: 260 watts
sensitivity: 88 dB
top-mount depth: 2-3/8″SKU: n/a
